Hoyt VTM 34

Brand: Hoyt

Hoyt VTM 34 designed for the bowhunter who wants stability, full draw comfort and the ultimate in dependability. With a longer axle to axle length, a generous brace height and an ATA speed of 334 fps, produced with the binary HBX Pro Cam, the VTM is an excellent choice for those seeking a longer shooting platform. Don't miss out

Hoyt VTM 34 Description

Two new axle to axle configurations of 31" and 34" (compared to the Ventum Pro).

Through riser design refinement, such as moving material and mass to fine tune the design and improved Hole Shot string silencers (called Holeshot V2), the VTM series bows are 31% quieter than the Ventum Pro series, which were Hoyt's quietest bows ever.

When accessorised with the Hoyt In-Line accessory system, the VTM gets 11% quieter (in addition to the 31% mentioned above) and has a 59% reduction in vibration!

The In-Line system includes

  • Pic Rail Sight mounting location which moves the weight to the front of the bow for better balance. Also most pic rail sights are 4 oz lighter than the non-pic rail version
  • Integrate Rest moves the rest to the rear of the bow, once again getting the weight off the side of the bow
  • Super Light Quiver System with the sight and rest out of the way, the In-Line Super Light Quivers can get insanely close to the bow, resulting in better balance, better aiming and better shooting. Plus the quivers are super quiet and actually help make the bows quieter as mentioned above
  • Lower Stabiliser location with the accessories all In-Line, the bow balances better when accessorised and this lower stabiliser location does a better job of stabilising the bow because of it's lower, farther forward location. The weight of the stabiliser is lower on the bow for a better centre of gravity and it's further out on the front of the bow as if it was a 7" stabiliser, which allows you to use a shorter, lighter stabiliser with the same stabilisation effect, thus reducing the overall weight of your complete set up
  • SL Side Bar Mount, if you like to use a side bar, the SL Side Bar Mount is 2 to 3 oz lighter than other side bar brackets. And with the In-Line system, since the bow balances better, you don't need as long or as heavy side bar to get the same effect, so you once again save overall weight from your complete set up
  • Integrate Drop Cord Slot where you will notice a slot machined into the TEC bar so that the Drop Away Cord on the Integrate Rest has a direct path to the cable
  • Garmin Xero trigger wire slot where there is a slot machined on the front of the riser for the trigger wire when using the Garmin Xero sight
  • Vital Point grip is Hoyt's most popular grip to date and comes standard on the VTM
  • HBX Pro Cams are the same cams that made the Ventum Pro and RX-7 so smooth, are the engine for the VTM series as well. This cam is a game changer, making Hoyt bows draw smooth, shoot smooth and quiet and easy to tune and adjust the draw length

Specs at a glance

  • IBO Speed up to 334 fps
  • Weight ranges 40lbs, 50lbs, 60lbs, 65lbs, 70lbs and 80lbs. Please specify weight required. All bows are adjustable 10lbs down from the peak draw weight
  • Draw length range 26"-31". Please specify draw length
  • Brace Height 6.25"
  • Axle to Axle 33.75"
  • Mass weight 4.8lbs
  • Available in Right Hand and Left Hand. Please specify RH or LH
  • Available in colours of Buckskin, Wilderness, Bourbon and BlackOut and at an additional cost of $145.00 in RealTree Edge. Please specify colour
  • Also available at an additional cost of $145.00 in Kuiu Verde 2.0, Gore Optifade SubAlpine and Gore Optifade Elevated II which are not stocked colours but can be special ordered. Please enquire
  • Also available at an additional cost of $199.00 in hunting colour options of Raptor Highland, Bone Collector RealTree Edge, Bone Collector BlackOut, Keep Hammering Raptor Highland and Keep Hammering BlackOut, which are not stocked colours but can be special ordered. Please enquire
  • Made in USA
  • Hoyt VTM 34, More than a Bow. Check it out today.

    Bow Cams: HBX Pro
    Limbs: Parallel split
    Speed: 334 feet per sec.
    Axle to Axle: 33.75 inches
    Brace Height: 6.25 inches

    Model Status: Superseded

    The Hoyt VTM 34 is no longer available. It has been replaced by the
    Call Abbey Archery Free 1800 883 664

    Got a question, can't see what you want or, need help?
    Search for products at the top left of this page or, phone us free from within Australia on 1800 883 664 (Sydneysiders - please call 8850-6400) or, from outside Australia call: Sydney +61 2 8850 6400.
    Or, send us a message.

    All Prices are in Australian Dollars (AUD) and include GST except where noted.

    Abbey Archery: Australia's largest Archery Company since 1975. Now celebrating 49 years of service.

    Unit 7, 15 Carrington Road, Castle Hill, NSW, 2154 Australia. Phone: 02 8850-6400

    AbbeyArchery.com.au is a secure store that respects your privacy.

    Copyright © 2006-2024 Abbey Archery Pty. Ltd. ABN 92051015555

    Compound Bows, Recurves, Arrows, Shafts and Archery Supplies