The HyperEdge from Hoyt has everything an archer ever needed in a tournament bow. 36 inch Axle to Axle, 7 inch Brace and shooting 325 fps. The HyperEdge is sure to win, no matter what the competition
Hoyt HyperEdge Description
Hoyt has built the top dog of tournament bows with the HyperEdge.
There are so many features that are built into the HyperEdge, it is destined to perform no matter what tournament it's entered into.
Starting with the modular grip system which gives the archer an ability to change the grip angle to desired aiming preferences. This is a fully customisable grip system allowing the bow to be perfectly tuned to the archer's specific hand position.
The DFX cam system incorporates two cable stops which make for a very solid back wall. If you're looking for absolutely no give at all, install the optional limb stop for a wall that simply will not budge.
At 36 inches axle to axle the UltraFlex Limbs and DFX Cam and a Half work in sync which actually allows a longer axle to axle at full draw. This makes the HyperEdge hold and aim like it's a 40 inch non parallel limb bow.
Hoyt added yet another feature to the HyperEge including the ZT cable guard into the bow. The ZT cable guard system is proven to eliminate torque at full draw and also increase smoothness in the draw cycle.
Top it off with a super forgiving brace height of 7 inches and an actual ATA speed of 325fps and the HyperEdge really has it all.
Smooth to draw, easy to aim, solid back wall and the adjustability to fine tune the bow will suit any style.
The stability of the Hyper Edge is incredible and after the shot there is minimum hand shock. Hoyt listened to archers around the world and have designed the ultimate in tournament bows.
Look out for the HyperEdge at the top of the leader board at archery tournaments across the globe.
Specs at a glance
- ATA Speed 325fps
- Weight range 30-40lbs, 40-50lbs, 50-60lbs, 60-70lbs. Please specify weight required.
- Draw length range 25.5"-27.5", 27.5"-29.5", 29.5"-31.5". Please specify draw length
- Brace height 7"
- Axle to Axle 36"
- Mass weight 4.5lbs
- Let-Off 75%
- DFX Cam & 1/2 Cam
- Riser Aluminium
- Ultra Flex Limb technology
- Parallel split limb technology
- Multi-layer limb lamination
- Zero Torque Cable Guard system
- Pro Lock Limb Pocket system
- In-line roller cable guard
- Perfect balance stabilisation system
- Dual Cable Stops
- Optional Limb Stop
- Modular Grip System
- Air Shox
- Stealth Shot
- Shock Rod
- FUSE Strings and Cables
- Available in Right Hand and Left Hand. Please specify RH or LH
- Available in a standard hunting colour option of Black Out.
- Custom Colour Accessories. Hoyt Stealth Shots, AirShox or LimbShox, Shock Rods and Pro Fit Wood Grip accessories are available in 9 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece accessory kit.
Hyperventilating? You should be.
Get a HyperEdge on the competition.
The new Ultra Flex Limb system. Utilises entire length of limb, for increased efficiency, through our patent-pending pivoting pocket design. Past-parallel design creates less limb movement, resulting in a quiet, vibration-free shot.
New DFX Cam Technology maximises effective string angle, creating a longer axle-to-axle at full draw, increasing accuracy and stability; encourages a more comfortable and accurate head position; gives the manoeuvrability benefits of a short bow in your ground blind or tree stand, while providing the advantages of a longer axle-to-axle bow; DFX Cam design creates less limb movement, resulting in a quiet, vibration-free shot.
DFX Cam optimises peep position, creating a more direct string angle and brings the peep closer to your eye, increasing peep-to-sight distance and maximising accuracy.
DFX Cam allows a more comfortable and consistent anchor and alignment; eliminates 'head tilt' at anchor, by bringing the string to your nose, promoting proper head position and form. Reduced facial contact and string pressure results in more accurate and consistent arrow flight.
DFX Cam features optional limb stop for those seeking an even stiffer back wall experience than already afforded by the new dual cable stops, the DFX cams also come with a limb stop option. If you are after that zero-play feeling at full draw, the first-ever optional limb stop brings a new definition of rock-solid rigidity to the Hoyt back wall.
Effective string position at full draw. Head position is vital to the consistency and accuracy of your shot. The new UltraFlex Limb and DFX Cam systems work together to deliver a dramatically broader string angle, an increased full-draw axle-to-axle measurement and a more optimal peep position. These innovations allow a more relaxed, strain-free posture at full draw and reduce facial contact, string pressure and eye fatigue at anchor.
The result is a 2016 30.5-inch bow that feels and performs like last year's 34-inch equivalent. Yes, you read that right, your compact tree stand or ground blind bow will feel and perform like a stable and forgiving 34-inch bow and your 34-inch bow will perform like a 37-inch target dream bow. If the numbers don't convince you, your experience at full-draw and your tightened arrow groups will.
|Bow Cams:||DFX Cam & 1/2|
|Speed:||325 feet per sec.|
|Axle to Axle:||36 inches|
|Brace Height:||7 inches|