Bohning Blazer Tiger Stripe ArroWraps

Because sometimes you want more colour.

Now in tiger stripe wraps, sure to appeal to archers of all disciplines.

Simple and easy "roll-on" application. Use a semi-soft flat surface, like a mouse pad to apply wrap.

Works great with all adhesives.

Bohning Tiger BlazerWraps are the perfect match for the Blazer Tiger Vanes.

Wraps come in a convenient 13 pack, are only 10.16cm long and 2.22cm wide or 4" x 0.875" to minimise overlap and each BlazerWrap weighs a mere 5 grains (+/- .5 grain).

BlazerWraps help you visually locate or identify your arrows in flight, on the ground, on the shooting line or in the scrub.

With Bohning BlazerWraps, you can easily fletch your vanes with any fletching adhesive.

Wraps are made from seven year outdoor durable 2 mm (.08") vinyl. Tiger BlazerWraps are illustrated at right in the 2nd, 3rd and 4th image on the left hand side and below on the arrows fletched with Tiger Vanes. Blazer Tiger Vanes can be purchased separately.

Simple and easy "roll on" application. It is suggested that you use a semi-soft, flat surface - a mouse pad works great.

To apply wraps. Clean all old adhesive from arrow shaft using alcohol or thinner. Prep shaft surface using Bohning SSR cleaner which can be purchased separately or an abrasive detergent. Shaft surface should appear dull, not shiny. Remove wrap. Place wrap on a flat surface, adhesive side up. Align shaft with edge of wrap and roll with steady motion and pressure.

To remove wraps, there are 3 options. Soak in hot tap water for approximately five minutes and peel wrap off. Alternatively, heat wrap with hair dryer until soft and peel wrap off. Alternatively, scrape wrap off using a removing tool like The Bohning "Stripper" glue, vane and arrow wrap remover. Always clean shaft after removing wrap.

• Improves the fletching adhesion
• Customise the look of your arrows
• Won't affect the flight of your arrow
• Adds minimal weight to the shaft

Dress up your hunting or target arrows for increased visibility and style. Installation instructions and illustrations on back of pack.

Bohning 4" tiger stripe arrow wrap is 1" wide and is for standard carbon 19-64 arrow shafts.

Sold in packs of 13 wraps.

Made in USA

Available in 7 tiger stripe colours.

• Green Tiger
• Orange Tiger
• Pink and Black Tiger
• Pink and White Tiger
• Red Tiger
• White Tiger
• Yellow Tiger

Please specify colour choice.

If you would like sent a review on Bohning SSR, ArroWraps, Blazer Helix Fletching Jig, Bohning Fletch-Tite Platinum glue and Blazer vanes, please include your request in Step 2 of the Checkout process when ordering.