Bohning Ferr-L-Tite Hot Melt 453.59gm or 1.0lb brick

The Original Bohning Ferr-L-Tite Hot Melt adhesive cement is a durable, high impact, shock resistant, heat reversible bond.

It is a tough elastic, waterproof bond that adheres points & inserts to aluminium or wood shafts.

Heat reversible means if at a later time you want to remove your points & inserts, you just heat up the end of the shaft over the flame of an alcohol burner and just remove the point or insert. Make sure you rotate your aluminium shaft fairly rapidly to broadcast heat without damaging the exterior of the shaft.

Simply apply Ferr-L-Tite Hot Melt to an open flame and heat adhesive until it is about to melt. The melting point for Ferr-L-Tite is 300 degrees F. Apply adhesive to insert. Install insert and rotate one full turn. Wipe excess adhesive from shaft. Cloth gloves are recommended when using Ferr-L-Tite with heat.

Hot Melt cement

• Tough, elastic, waterproof bond
• Adheres points & inserts to aluminium & wood shafts
• Heat reversible
• Comes in this giant economy 453.59gm or 1.0lb size brick which is ideal for pro shops, enthusiasts and clubs. Also available in a convenient 12gm or 0.42oz stick to suit archers who only want a small quantity
• Cure time - 24 hours
• A Bohning Alcohol Burner is the easiest, most convenient way to heat Bohning Ferr-L-Tite. Alcohol Burner can be purchased separately

If you would like sent full instructions on how to use Ferr-L-Tite Hot Melt, please include your request in Step 2 of the Checkout process when ordering.