Bohning Stretch Fletch 6pk
Put Blazer vanes on your arrows without a fletching jig. Use Bohning Stretch Fletch. It cannot be any easier
Bohning Stretch Fletch 6pkPrice: $27.95
$25.41 excl. GST**
** Your price if you do not reside in Australia
Bohning Stretch Fletch 6pk Description
If you want to put Blazer vanes on your arrows without using a fletching jig, then the Bohning Stretch Fletch is the answer.
The latest fletching innovation from Bohning gives you the quality and durability you trust which you have come to expect from Bohning and the convenience you need!
The Stretch Fletch is a one piece design with three Blazer vanes moulded on a three degree right helical, with an embossed Blazer logo on each vane.
This helical design is why Blazer vanes perform so well.
Stretch Fletch comes in an easy to install package which includes installation instructions.
The Stretch Fletch 38 grain vane is designed to fit standard carbon shafts with an outside diameter between .293 and .306.
At 2.875" long, the sleeve simply slides onto the arrow shaft and is held in place with a dab of adhesive or if the Stretch Fletch fits snugly, there is no need to use adhesive.
Instructions using adhesive. Measure .75" from the nock and mark the shaft. Slide the Stretch Fletch over the shaft until the nock is fully visible. Using a cotton bud, place a .5" band of adhesive below the Stretch Fletch. Slide Stretch Fletch down the shaft, over the adhesive until the mark at .75" is visible. Let dry.
Instructions without adhesive. Measure .75" from the nock and mark the shaft. Slide the Stretch Fletch over the shaft until the mark is fully visible. Now shoot! Stretch Fletch will not move rearward in flight. If Stretch Fletch moves forward on impact with target, simply slide back to .75" mark and continue shooting. For shaft sizes between .302 and .306, shake Stretch Fletch in talcum powder to allow for easier installation.
The one piece sleeve is moulded out of the same material as Blazer vanes, so durability is not an issue with no worries about vanes flying off or getting damaged.
Stretch Fletch comes in a pack of 6 and is available in 5 exciting colours of Neon Green, Hot Pink, White, Neon Orange and Neon Yellow. Please specify colour choice.
- Slide on installation
- Moulded with 3 Blazer vanes on a 3 degree right helical
- Each 2.875" sleeve is moulded out of the same material as Blazer vanes
- A moulded sleeve that simply slides onto the shaft and locks in place with a dab of adhesive
- Designed for standard carbon shafts with an outside diameter between .293" and .306"
- Features an embossed Blazer logo on each vane
- Weighs approximately 38 grains
- No jigs, no clamps, no boiling water. Just slip it on, lock it down and shoot
- Fletch without using a fletching jig
- Quality and durability you can trust plus convenience
- Available in 5 great colours
- Each package contains 6 fletches and simple installation instructions
- Fletching has never been easier
This is what people had to say about Bohning Stretch Fletch.
Rating 5 out of 5 stars. "Broadhead flight. Since this whole small fletching rage started, people forget that nothing has changed for someone who wants to shoot fixed blade broadheads. These are the only small simple fletchings that work. I shoot side by side the NAP twisters, blood vanes and the Stretch Fletch. By far the Stretchers worked the best. Great deal!" From Bill.
Rating 5 out of 5 stars. "Great! These things work great!" From Bowhunter brown