Beiter Centralizer T3 Set, all black limited edition

The T3 5 piece Centralizer or stabiliser set is an all-black limited edition and comprises

• 1 x 33" long Centralizer T3G x 28 Rod
• 2 x 12" 12G Side Rods
• 1 x 3" 3ST Extender with pins
• 1 x V-Bar 90 x 0 SW
• 1 x black Hood

Like all Beiter products, the Centralizer was tested by top archers worldwide and used successfully in competitions, winning many titles and medals since its introduction in 1996.

Four carbon rods, positioned to form a square are held together by plastic blocks, called tuners made from high quality thermoplasts and elastomers - the result is a new concept of stabilisation.

Tests have shown that the system is able to absorb more vibration, thus giving the archer less problems while aiming and executing the shot.

The factory setting of the tuners avoids resonance in the system. Tuners can be moved to offer the opportunity of an individual adaptation.

Beiter Centralizer Long Rods are available with Weight Adapters or End Caps in the following lengths - 26", 28", 30", 33", 35", 37", 41", 45", 49", 54".

Depending on its length, you can order your Centralizer with 2, 3, 4 or 5 Tuners installed.

Beiter Tuners on Centralizers have factory installed settings and you may add, remove or move the Tuners as you wish but if you do remove or move Tuners, mark the original position of the Tuners in case the factory settings need to be restored.

If you have not retained the details of the original settings or you want to add an additional Tuner, you can contact us and we will ascertain the information from the Beiter factory.

If you don't feel comfortable with your stabiliser, switch to a longer one with possibly more tuners. The current tendency is to shoot with longer rods, with 3 or 4 tuners, with no weight in front.

Beiter Centralizer stabilisers, Side Rods and Extenders are made in 14 different colour combinations - blue, salt 'n' pepper (black and white), black-blue, blue-white, black forest (dark green and black), dauchingen devil (red and black), grey panther (grey and black), black pearl (dark blue and black), black oyster (grey and black), flame (orange and black), hornet (lemon and black), rose (pink and black), lime (lime green and black), black graphite (purple and black).

The Beiter Centralizer Long Rod comprises

• 33" Centralizer Long Rod
• 3 factory installed Tuners
• 5-16"x24 thread
• 28mm long Weight Adapter
• A Robertson (square) 353/SW 3.0x75 screw driver to adjust tuner screws
• Comprehensive instructions

Beiter Side Rods when used with a Beiter V-Bar offer better horizontal stability and reduce additional vibrations. A Side Rod can be added to the front of a recurve or compound bow as a hunting stabiliser. Beiter Centralizer Side Rods are made in 8", 10", 12" or 14" lengths with or without both Endcap or Weight Adapter, with 1 Tuner (except for 8").

Beiter Extenders are available in 2 different versions - with steel bushing and Position-Pins, for use with the Beiter V-Bar and with steel bushing, without pins for use with most other V-Bars on the market. Beiter Extenders can be ordered in 3", 4" or 5", without or with 1 Tuner (4" and 5" sizes only).

The Beiter Centralizer Extender 1.25" is an Extender for your Centralizer Stabiliser System, but on the other hand, it is not! It always stays mounted on your bow and allows for the same positioning of the Beiter V-Bar and as the Beiter Centralizer Extender 1.25" is only ever installed once on your bow, it suits also bows with a slotted steel bushing for the stabiliser like the Win & Win riser, thereby extending the life and function of the O-Ring. The Beiter Centralizer Extender 1.25" is available in blue or black.

The Beiter V-Bar is the complement to the Beiter Extender with Pins and completes the Beiter Centralizer Stabiliser System. With the Beiter V-Bar, all other components - Long Rod, Side Rods, Extender with Pins or Extender 1.25" combine as an integral stabilisation system to allow optimal balance, dampening and absorption of vibrations.

A Beiter Centralizer Long Rod can be installed directly to the Beiter V-Bar, to a Beiter Extender with Pins or a Beiter Extender 1.25". All you need is a 28mm thread which comes standard on your Beiter Long Rod.

Beiter V-Bars come in black or silver and in 90 degrees x 0 degrees, 90 degrees x 17 degrees, 70 degrees x 0 degrees and 70 degrees x 17 degrees and each V Bar includes a telescoping circular clear plastic storage tube to stow your V Bar safely.

The Beiter Hood is designed to fit the thread of the Weight Adapter of any Beiter Centralizer.

We can special order colours and sizes. Please enquire.

Many inferior knock-off imitators have come on the scene and appear to look and feel like a Beiter Centralizer, but lack Beiter's precision engineering, top quality materials and the highest quality standards and certainly do not perform anywhere near as well as a Beiter Centralizer. Just ask a Beiter owner - they will tell you there is only one stabiliser - Beiter.